TDMK company

SPECIFICATIONS

Parameter		Specifications
Polarity		Positive / Negative
Interval		(Minimum charging time) to 999 sec. 1 sec. step
No. of output setting		1 to 999 times 1 time step

Parameter Specifications

1.2/50μs-8/20μs Combination waveforms	Voltage surge	Output voltage 0.5 to 6.0kV ±10%
		Front time 1.2μs±30%
		Duration 50μs±20%
	Current surge	Output current 250 to 3000A ±10%
		Front time 8μs±20%
		Duration 20μs±20%
	Minimum charge time	10 Sec.
	Output impedance	2Ω±10%
0.5μs-100kHz Ring wave	Voltage surge	Output voltage 0.5 to 6.0kV ±10%
		Rise time 0.5μs±0.15μs
		Frequency: 100kHz ±20kHz
	Current surge	2nd peak voltage 40-110% of 1st peak voltage
		3rd peak voltage 40-80% of 2nd peak voltage
		4th peak voltage 40-80% of 3rd peak voltage
	Minimum charge time	5 Sec.
	Output impedance	12 Ω±3 6 Ω at 12 Ω selection in interruptive resistance 30 Ω±8 Ω at 30 Ω selection in interruptive resistance
Coupling network	Line - Line : 18μF, Line - PE : 10Ω+9μF, Line - PE simultaneous coupling (L+N-PE) : 9μF/9μF
Decoupling coil	1.5mH
AC EUT power capacity	Single phase AC 240V 16A MAX (50/60Hz)
DC Eat power capacity	DC125V/16A MAX
Phase angle control	0 to 360°±10°, Based on set injection / return angle

Parameter Specifications

Parameter	Specifications
Voltage monitor	BNC output, 1/1000±10%
Current monitor	BNC output, 1mV/A±10%
External communication	RS-232C optical communication
Power supply	AC100V to 120V±10%, AC200V to 240V±10%,50/60Hz, Power consumption: Less than 300VA
Dimensions	W430×H515×D500 mm (Projection excluded)
Mass	Approx. 65kg

Our Partners